BUILD THE (IM)POSSIBLE: Join The International Contest and Win the Challenge!
  1. PRODUCTS
  2. AIRTIGHTNESS AND WATERPROOFING
  3. MEMBRANES
  4. VAPOR IN
  5. DEFENCE ADHESIVE 200

SELF-ADHESIVE PROTECTIVE MEMBRANE FOR BUILDING ELEMENTS

DEFENCE ADHESIVE 200

The product, once applied, is invisible and allows both the markings of the powder tracer on the panel and the mounting holes to be easily seen.
The membrane protects the timber without interfering with either handling or site operations.

The surface treatment makes the product waterproof. On site, the membrane resists abrasion and trampling.

With the self-adhesive surface of the membrane, installation is quick and easy. In case of a mistake during installation, the membrane can be repositioned and reapplied without difficulty. Protection of building elements is guaranteed for 12 weeks.

Videos

Documents

Technical data sheets

DEFENCE ADHESIVE 200

CODE description g/m² liner H
[m]
L
[m]
A
[m²]
pcs./pallet
DEFA200 New DEFENCE ADHESIVE 200 1.55m 200 150/1400 1.55 50 77.5 -
DEFAS200 New DEFENCE ADHESIVE 200 STRIPE 0,385m 200 192.5/192.5 0.385 50 19.25 -
DEFA200490 New DEFENCE ADHESIVE 200 0,49m 200 245/245 0.49 50 24.5 72
DEFA200990 New DEFENCE ADHESIVE 200 0.99m 200 495/495 0.99 50 49.5 30

Technical Data
EN 13984

Property Standard Tested Values USC Conversion
Mass per unit area EN 1849-2 200 g/m² 0.66 oz/ft²
Thickness EN 1849-2 ca. 0,25 mm ca. 10 mil
Water vapour transmission (Sd) EN 1931 2,5 m 1.399 PERM
Resistance to nail tearing MD/CD EN 12310-1 > 60 / 65 N > 13 / 15 lbf
Watertightness EN 1928 conforming -
Thermal resistance - -40 / 80 °C -40 / 176 °F
Reaction to fire EN 13501-1 class E -
Density - ca. 800 kg/m³ -
Water vapour resistance factor (μ) - ca. 10000 -
Exposure to weather - 12 weeks -
Elongation MD/CD EN 12311-1 > 40 / 40 % -
Tensile strength MD/CD EN 12311-1 > 120 / 80 N/50mm > 14 / 9 lb/in
Application temperature - 5 / 25 °C 41 / 77 °F
Storage temperature (1) - -5 / 35 °C 23 / 95 °F
1.

Specifications

Supply and installation of vapour control membrane, type DEFENCE ADHESIVE 200

Composition:

  • EVA coating and PP protection layer

Properties:

  • Mass per unit area (g/m2) : 200
  • Water vapour transmission (Sd) (m) : 2,5
  • Tensile strength MD/CD (N/50mm) : >120/80
  • Elongation MD/CD (%) : >40/40%
  • Resistance to nail tearing MD/CD (N) : >60/65
  • Watertightness (class) : conforme
  • Water column (cm) : -
  • VOC emissions (COV) (% (class A+)) : -
  • Driving rain test : -
  • UV resistance with open joints up to 50 mm wide exposing no more than 40 % of the surface : -
  • Temperature resistance (°C) : -40/+80
  • Reaction to fire (class) : E

CE marking in accordance with EN 13984
DEFENCE ADHESIVE 200 it can be used for temporary protection.

The application surface must be dry, free of dust and grease, and not be anti-adhesive. Surface elements must be removed so that the membrane is not damaged during application.

During application, pressure must be applied to the membrane to ensure proper adhesion. To prevent rainwater accumulation on the membrane, it is necessary to design the building water drainage. 15 cm of overlap. Possibility of waterproofing the element joint using INVISI60/100/200 wide pre-cut tapes.

Composition

top layer -
bottom layer non-woven PP fabric
GLUE acrylic dispersion without solvents
release liner removable plastic film