1. PRODUCTS
  2. FALL PROTECTION SYSTEM
  3. ANCHOR POINTS
  4. TOWER

SUPPORT FOR TIMBER, CONCRETE AND STEEL ROOFS

TOWER

The TOWER support can be installed directly on timber, concrete or steel.

It is a device with controlled deformation which limits the transfer of load to the structure if the operator falls from a height.

Discover TOWER, the support for timber, concrete and steel that guarantees your safety at work.

The TOWER support has a markedly elastic-plastic behaviour that makes it possible to reduce the load on the fastenings and structure in the event that an operator falls.

The height of the support in between 300 and 600 mm, to adapt to different roofing thicknesses.

It is suitable for installation on flat and sloping surfaces, and for the creation of an overhead anchor line.

Once installed it ensures a low visual impact, for an aesthetically satisfactory result.

Maximum load: up to 4 operators

Features

Application LIFE LINE, SINGLE POINT
Substructure TIMBER, CONCRETE, STEEL
Field of use MIN. TIMBER STRUCTURE 160 X 160MM, MIN. CONCRETE STRUCTURE 140MM, MIN. STEEL STRUCTURE 6MM
Number of workers 4
Material S235JR ZINC-PLATED STEEL

Documents

Technical data sheets
Declaration of conformity
Declaration of Installation and inspection

Installation manual

Manual for installation and use

TOWER

CODE material B
[mm]
P
[mm]
H
[mm]
pcs.
TOWER300 S235JR zinc-plated steel 150 150 300 1
TOWER400 S235JR zinc-plated steel 150 150 400 1
TOWER500 S235JR zinc-plated steel 150 150 500 1
TOWER600 S235JR zinc-plated steel 150 150 600 1
TOWERA2300 stainless steel 1.4301 – AISI304 150 150 300 1
TOWERA2400 stainless steel 1.4301 – AISI304 150 150 400 1
TOWERA2500 stainless steel 1.4301 – AISI304 150 150 500 1
TOWER22500 S235JR zinc-plated steel 150 150 500 1

Related products

Safety Solutions
Back to Homepage