Diameters up to 13 mm and lengths up to 1000 mm.
Reduced minimum distances and use also allowed in directions parallel to the grain.
Special self-perforating tip approved for insertion without pre-bored holes for all sizes.
Surface ”durocoat“ treatment, for excellent corrosion resistance.
FIELDS OF USE
Solid-wood, glulam, X-Lam, LVL, wood-based-panel joints, reinforcements and couplings. Service classes 1 and 2.
The lengths of the connector allow for the creation of very large structural solutions, such as coupling of very high beams and joints on large structures.
The connector is approved for insertion without a pre-bored hole (an 80mm directional guide hole is recommend and allows for fast execution of complex structural reinforcements).
In large structures, the compression and tensile stresses perpendicular to the wood fibres are absorbed by the connector placed along the height of the elements to be reinforced.
|Technical data sheets|
|Technical data sheets 2|
|Declaration of performance (DOP)|