SELF-ADHESIVE MEMBRANES by Rothoblaas

SELF-ADHESIVE MEMBRANES FAST INSTALLATION AND PROTECTION FROM ATMOSPHERIC AGENTS

MAXIMUM PROTECTION PREFABRICATION

PROTECTION

Installing self-adhesive membranes in the factory is advantageous in many ways:

Timber panels are protected from the weather both during transport and at the construction site. Membranes prevent damage caused by water, moisture or other unforeseen events, improving the effectiveness of the building construction process.

• the membrane is applied horizontally rather than vertically to a panel • installation is facilitated because it is carried out in a cleaner environment than at the construction site • once on the construction site, the panel is already ready, without the need for intermediate processing

Because they are self-adhesive and without the need for mechanical fastening and additional sealing tapes, installation is immediate and quick even on the construction site.

Easy installation without the need for tapes

Complete protection from water damage and weathering

Fast and secure adhesion

Non-slip and panel protection

ALL THE BENEFITS • TIME SAVINGS: prefabricated is faster • ECONOMIC SAVINGS: less assembly labour, less risk of damage • SAFETY: membranes are non-slip, high weight, suitable for different application contexts • LIFTING POSSIBILITY: membranes are also suitable for vacuum lifting systems ( after testing in the factory) • CUSTOMIZATION: All self-adhesive membranes are customizable in terms of brand, weight and size

DEFENCE ADHESIVE 200

EN 13984

SELF-ADHESIVE PROTECTIVE MEMBRANE FOR BUILDING ELEMENTS

EXTREMELY TRANSPARENT The product, once applied, is invisible and allows both the markings of the powder tracer on the panel and the mounting holes to be easily seen. The membrane protects the timber without interfering with either handling or site operations.

WATERPROOF AND NON-SLIP The surface treatment makes the product waterproof. On site, the membrane resists abrasion and trampling.

12-WEEK GUARANTEED PROTECTION With the self-adhesive surface of the membrane, installation is quick and easy. In case of a mistake during installation, the membrane can be repositioned and reapplied without difficulty. Protection of building elements is guaranteed for 12 weeks.

COMPOSITION top layer EVA coating bottom layer non-woven PP fabric glue acrylic dispersion without solvents release liner precut removable plastic film CODE

DEFA200

DEFAS200

DEFA200490 DEFA200990

Water vapour transmission (Sd)

2,5 m 1.4 perm

Mass per unit area

200 g/m2 0.66 oz/ft2

Available widths

1,55 m 5’ 1 ft

0,385 m 1’ 3 1/8 ft

0,49 m 1’ 7 1/4 ft

0,99 m 3’ 3 ft

m2 roll

77,5 m2 834 ft2

19,25 m2 207 ft2

24,5 m2 264 ft2

49,5 m2 533 ft2

WATERPROOF, VAPOUR PERMEABLE The special polymer coating makes the membrane waterproof and airtight, but vapour permeable. This makes it easier for any seepage to dry out.

SELF-ADHESIVE MEMBRANES

TRASPIR EVO UV ADHESIVE 250

EN 13859-1/2

SELF-ADHESIVE BREATHABLE MONOLITHIC MEMBRANE RESISTANT TO UV RAYS CLASS B-s1, d0 B-s1,d0

REPOSITIONABLE In case of a mistake during installation, the membrane can be repositioned and reapplied without difficulty.

MONOLITHIC The polymer composition confers excellent resistance of the membrane to weathering and chemicals. Waterproof and airtight, but permeable to vapor. Highest degree of durability.

PERMANENT UV STABILITY UV resistance is permanent even when exposed to open joints up to 30 mm wide and uncovering a maximum of 30 % of the surface area for façade application.

COMPOSITION top layer highly UV ray-stabilised PP non-woven fabric middle layer breathable monolithic PU film bottom layer non-woven PP fabric glue acrylate dispersion without solvents release liner precut removable plastic film CODE

TUVA250

TUVAS250

Water vapour transmission (Sd)

0,5 m 7 perms

Mass per unit area

250 g/m2 0,82 oz/ft2

Available widths

1,45 m 4’ 9 1/8 ft

0,36 m 1’ 2 1/8 ft

m2 roll

72,5 m2 780 ft2

16 m2 194 ft2

SELF-ADHESIVE MEMBRANES

FIRE RESISTANCE It has fire reaction B-s1,d0 and flame retardant capacity according to EN 13501-1.

BARRIER ALU NET ADHESIVE 300

EN 13984

SELF-ADHESIVE REFLECTIVE VAPOUR BARRIER Sd > 1500 m

RADON BARRIER

B-s1,d0

COMPLETE BARRIER The special composition provides maximum resistance to the passage of vapour and radon gas. The membrane has been tested according to ISO/ TS 11665-13.

REACTION TO FIRE B-s1,d0 Self-extinguishing membrane which does not spread the flame in case of fire contributing to the protection of the structure.

COMPOSITION top layer functional aluminised PE film middle layer PE reinforcing grid bottom layer PE film glue acrylate dispersion without solvents release liner precut removable plastic film CODE

BARALUA300

BARALUAS300

Water vapour transmission (Sd)

4000 m 0.001 US perm

Mass per unit area

300 g/m2 0.98 oz/ft2

Available widths

1,45 m 4’ 9 1/8 ft

0,36 m 1’ 2 1/8 ft

m2 roll

72,5 m2 780 ft2

16 m2 194 ft2

REFLECTIVE Thanks to its ability to reflect up to 70% of the heat, the membrane improves the thermal performance of the construction panels.

SELF-ADHESIVE MEMBRANES

VAPOR ADHESIVE 260 SELF-ADHESIVE VAPOUR CONTROL MEMBRANE

Önorm B3667 DB

AUS

AS/NZS 4200.1 Class 2

SAFE/HIGH PROTECTION

SIA 232

V.v.u. V.v.o.>90mm

ZVDH Dh

DTU 31.2 pare-vapeur E1 Sd3 TR1

UNI 11470 A/R1

USA

IRC Class2

The top layer ensures excellent slip resistance and high protection of the functional film.

SECURE SEALING The adhesive surface prevents the formation of airflow behind the membrane in case of accidental breakage or failure to seal.

VERSATILE It protects the panels during transport and construction. The vapour shield is safe and effective as a result of good diffusion resistance.

COMPOSITION top layer non-woven PP fabric middle layer vapour control PP film bottom layer non-woven PP fabric glue acrylate dispersion without solvents release liner precut removable plastic film

CODE

VA260

VAS260

Water vapour transmission (Sd)

19 m 0.184 perm

Mass per unit area

260 g/m2 0,85 oz/ft2

Available widths

1,45 m 4’ 9 1/8 ft

0,36 m 1’ 2 1/8 ft

m2 roll

72,5 m2 780 ft2

16 m2 194 ft2

SELF-ADHESIVE MEMBRANES

EXCELLENT ADHESION The fully self-adhesive surface allows fast and safe installation and does not compromise the performance of the product.

TRASPIR ADHESIVE 260 HIGHLY BREATHABLE SELF-ADHESIVE MEMBRANE

SIA 232

AUS

USA

AS/NZS 4200.1 Class 3

EXCELLENT ADHESION

Önorm B4119 UD Typ I US

UD (g)

ZVDH USB-A UDB-A

DTU 31.2 E1 Sd1 TR2 E600 Jf C1

UNI 11470 A/R3

IRC vp

Thanks to the new generation glue, the membrane ensures good adhesion even on rough OSB.

RELIABLE The top layer ensures excellent slip resistance and high protection of the functional film.

BREATHABLE Thanks to the patented glue, the membrane remains perfectly breathable even when fully bonded.

COMPOSITION top layer non-woven PP fabric middle layer PP breathable film bottom layer non-woven PP fabric glue acrylate dispersion without solvents release liner removable plastic film

CODE

TA260

TAS260

Water vapour transmission (Sd)

0,22 m 15.893 perm

Mass per unit area

260 g/m2 0,85 oz/ft2

Available widths

1,45 m 4’ 9 1/8 ft

0,36 m 1’ 2 1/8 ft

m2 roll

72,5 m2 780 ft2

16 m2 194 ft2

SPECIAL GLUE The acrylic dispersion glue has a specific formulation to ensure breathability and does not alter the functions of the functional film inside the membrane.

SELF-ADHESIVE MEMBRANES

RECOMMENDATIONS FOR INSTALLATION APPLICATION ON CEILING

APPLICATION ON WALL

10-15 c

01FLMEMADEN

www.rothoblaas.com

01.24