VAPOR 150
The VAPOR 150 vapour control membrane regulates the passage of moisture preventing the formation of interstitial condensation within the insulation package.
It consists of a functional film and polypropylene protective layers and is designed for application both on the inside and outside of roofs and walls.
UV resistant, it can be used directly on top of the wooden plank.
VAPOR 150, the vapour control membrane for water vapour control
Documents
-
Technical data sheets
-
Xml-File WUFI
-
Recommendations for installation
Technical Data
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Mass per unit area | EN 1849-2 | 150 g/m² | 0.49 oz/ft² |
| Thickness | EN 1849-2 | 0,5 mm | 20 mil |
| Water vapour transmission (Sd) | EN 1931 | 13 m | 0.269 US perm |
| Tensile strength MD/CD | EN 12311-2 | > 250 / 200 N/50mm | > 29 / 23 lbf/in |
| Elongation MD/CD | EN 12311-2 | 35 / 40 % | - |
| Resistance to nail tearing MD/CD | EN 12310-1 | > 130 / 150 N | > 29 / 34 lbf |
| Watertightness | EN 1928 | compliant | - |
| Resistance to temperature | - | -20 / 80 °C | -4 / 176 °F |
| Reaction to fire | EN 13501-1 | class E | - |
| Resistance to penetration of air | EN 12114 | < 0,02 m³/(m²·h·50Pa) | < 0.001 cfm/ft² at 50Pa |
| Resistenza al vapore d'acqua dopo invecchiamento artificiale | EN 1296 / EN 1931 | compliant | - |
| Alkaline water vapour resistance | EN 1847 / EN 12311-2 | npd | - |
| Thermal conductivity (λ) | - | 0,3 W/(m·K) | 0.17 BTU/(h·ft·°F) |
| Specific heat | - | 1800 J/(kg·K) | - |
| Density | - | ca. 300 kg/m³ | - |
| Water vapour resistance factor (μ) | - | ca. 26000 | - |
| UV stability | - | 336h (3 months) | - |
| Water column | ISO 811 | > 250 cm | > 98 in |
| VOC | - | not relevant | - |
Composition
| TOP LAYER | non-woven PP fabric |
|---|---|
| middle layer | vapour control PP film |
| BOTTOM LAYER | non-woven PP fabric |
Specifications
VAPOR 150
Supply and installation of self-adhesive vapour control membrane, type VAPOR 150.
Composition
From top layer to bottom layer:
-
non-woven PP fabric;
-
vapour control PP film;
-
non-woven PP fabric.
Properties
-
Mass per unit area [g/m²]: 150
-
Thickness [mm]: 0,5
-
Water vapour transmission (Sd)[m]: 13
-
Tensile strength MD/CD [N/50 mm]: > 250/200
-
Elongation MD/CD [%]:> 35/40
-
Resistance to nail tearing MD/CD [N]: > 130/150
-
Watertightness: comply with (EN 1928)
-
Reaction to fire: class E (EN 13501-1)
-
Resistance to temperature [C°]: -20/80
-
UV stability: 336h (3 months)
-
VOC [%]: not applicable
Standards and certifications
-
CE marked in accordance with EN 13984
-
AUS 4200.1 Class 2
Description
The application surface must be dry, free of dust and grease. Surface elements must be removed so that the membrane is not damaged during application.
Recommended use: direct UV protection is guaranteed. Installation is therefore permitted on both the internal and external sides of the building envelope.
Installation: Unroll the membrane. If the version without double-sided adhesive strips is used, sealing must be carried out using tape such as: FLEXY BAND, FLEXY BAND UV, SPEEDY BAND, or EASY BAND.
Ensure that the overlap between the membranes is at least 15 cm to achieve an optimal seal.
To ensure correct and professional installation, the use of a nail sealing point is required.
Further details regarding installation can be found in the specific instructions provided by the supplier.