ADHESIVE GLUE FOR SEALING MEMBRANES
MEMBRANE GLUE
MEMBRANE GLUE is the solvent-free acrylic adhesive, with good adherence to the most common supports. It offers a good compromise between adhesion and fast drying of the outer film, allowing application on vertical surfaces without slipping problems.
MEMBRANE GLUE, the cost-effective adhesive glue for sealing membranes.
The MEMBRANE GLUE membrane adhesive compound is easy to extrude, ready to use. It is easily removed with water prior to hardening. Thanks to the special formulation, the glue achieves the highest level of safety with regard to emissions that are harmful to health (EMICODE EC1 PLUS).
It is available in 310 ml and 600 ml sizes.
Documents
Technical data sheets
|
|
|---|---|
Recommendations for installation
|
MEMBRANE GLUE
| CODE | content
[ml]
|
contenuto
[US fl oz]
|
version | pcs. |
|---|---|---|---|---|
| MEMBRAGLUE310 | 310 | 10.48 | plastic cartridge | 24 |
| MEMBRAGLUE600 | 600 | 20.29 | soft cartridge | 20 |
Technical Data
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Composition | - | acrylic without solvents | - |
| Density | ISO 1183 | 1,05 g/cm³ | 0.61 oz/in³ |
| Tempo necessario per asciugatura 25°C / 50% RH (1) | - | 24 / 72 hours | - |
| Resistance to temperature | - | -20 / 80 °C | -4 / 176 °F |
| Application temperature (ambient, cartridge and support) (2) | - | 5 / 40 °C | 41 / 104 °F |
| Emicode | procedura di prova GEV | EC1 plus | - |
| French VOC classification | ISO 16000 | A+ | - |
| Transport temperature | - | 0 / 35 °C | 32 / 95 °F |
| Storage temperature | - | 10 / 25 °C | 50 / 77 °F |
1. The data expressed may vary depending on the thickness of the product applied and the specific installation conditions: temperature, humidity, ventilation, absorbency of the substrate.
2.
