PLASTER BAND LITE
PLASTER BAND LITE is the tape that can be plastered which controls the flow of vapour. Thanks to the integrated adhesive mounting strip, application is quick and easy.
The tape that can be plastered, is available in several variants to ensure tightness on every installation surface.
Also suitable for high thickness values of insulation or cladding due to its width of up to 200 mm.
Description
PLASTER BAND LITE: VAPOUR CONTROL TAPES WITH PLASTER MESH
PLASTER BAND LITE tapes that can be plastered are available in two airtight versions for indoor and outdoor use. Indoor it acts as a vapour control layer, outdoor as a breathable layer. Also available in a version with a plaster grid for indoor use.
The tape that can be plastered is made of a breathable membrane with the addition of an adhesive band, which ensures that the tape is also airtight and watertight. The surface of the tape is designed for places which need subsequent smoothing with plaster.
Documents
-
Technical data sheets
PLASTER BAND LITE IN
| CODE | B
[mm]
|
L
[m]
|
B
[in]
|
L
[ft]
|
pcs. |
|---|---|---|---|---|---|
| PLAIN7520 | 75 | 25 | 3 | 82 | 5 |
| PLAIN10020 | 100 | 25 | 3.9 | 82 | 4 |
| PLAIN15020 | 150 | 25 | 5.9 | 82 | 2 |
| PLAIN20020 | 200 | 25 | 7.9 | 82 | 2 |
PLASTER BAND LITE IN CON RETE PORTAINTONACO
| CODE | B
[mm]
|
L
[m]
|
B
[in]
|
L
[ft]
|
pcs. |
|---|---|---|---|---|---|
| PLAINN7020 | 130 | 30 | 5.1 | 98 | 1 |
| PLAINN12020 | 180 | 30 | 7.1 | 98 | 1 |
PLASTER BAND LITE OUT
| CODE | B
[mm]
|
L
[m]
|
B
[in]
|
L
[ft]
|
pcs. |
|---|---|---|---|---|---|
| PLAOUT7520 | 75 | 25 | 3 | 82 | 5 |
| PLAOUT10020 | 100 | 25 | 3.9 | 82 | 4 |
| PLAOUT15020 | 150 | 25 | 5.9 | 82 | 2 |
| PLAOUT20020 | 200 | 25 | 7.9 | 82 | 2 |
Technical Data PLASTER BAND LITE OUT
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Thickness | - | 0,5 mm | 20 mil |
| Water vapour transmission (Sd) | EN 1931 / EN ISO 12572 | ≤ 1 m | ≤ 3.497 US perm |
| UV resistance | - | 3 months | - |
| Solvents | - | no | - |
| Application temperature (1 ) | - | 5 / 35 °C | 41 / 95 °F |
| Storage temperature | - | 5 / 25 °C | 41 / 77 °F |
Technical Data PLASTER BAND LITE IN
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Thickness | - | 0,5 mm | 20 mil |
| Water vapour transmission (Sd) | EN 1931 / EN ISO 12572 | ca. 10 m | ca. 0.35 US perm |
| Tensile strength MD/CD | EN 12311-1 | 115 / 75 N/50mm | 13 / 9 lbf/in |
| Elongation MD/CD | EN 12311-1 | ≥ 40 / 70 % | - |
| Watertightness | EN 1928 | compliant | - |
| UV resistance | - | 3 months | - |
| Solvents | - | no | - |
| Application temperature | - | 5 / 35 °C | 41 / 95 °F |
| Resistance to temperature | - | -40 / 80 °C | -40 / 176 °F |
| Storage temperature (1 ) | - | 1 / 25 °C | 34 / 77 °F |
Composition PLASTER BAND LITE OUT
| SUPPORT | breathable three-layer PP membrane |
|---|---|
| GLUE | acrylic dispersion without solvents |
| RELEASE LINER | easy-release PP film |
Composition PLASTER BAND LITE IN
| SUPPORT | - |
|---|---|
| GLUE | acrylic dispersion without solvents |
| RELEASE LINER | PP film |
Specifications
PLASTER BAND LITE IN
Supply and installation of tape suitable for plastering, with mounting adhesive strip, Type PLASTER BAND LITE IN.
Composition
From top layer to bottom layer:
-
3-layer PP vapour control membrane;
-
acrylic dispersion without solvents;
-
PP film.
*an alternative version with plaster mesh is available
Properties
-
Thickness [mm]: 0,5
-
Water vapour transmission (Sd)[m]: ≥ 10
-
Tensile strength MD/CD [N/50 mm]: 115/75
-
Elongation MD/CD [%]: ≥ 40/≥ 70
-
Watertightness: comply with (EN 1928)
-
Resistant to UV rays: 3 months
-
Application temperature [C°]: +5/+35
-
Thermal resistance [C°]: -40/+80
-
Storage temperature [C°]: +1/+25
-
Solvents: no
Description
The application surface must be dry, free of dust and grease, and not be anti-adhesive. Surface elements must be removed so that the membrane is not damaged during application.
Technical fabric perfect for subsequent plastering, ensuring excellent visual appeal by allowing the tape to be concealed behind claddings and plaster.
Recommended use: The tape is designed exclusively for indoor applications.
Suitable for application on various smooth building substrates, such as timber or OSB panels, without the need for additional surface treatment. If the tape is applied to brick or concrete surfaces, the use of a primer such as PRIMER SPRAY is recommended.
The complete list of approved application surfaces can be found in the specific instructions provided by the manufacturer.
Installation: If applicable, the protective release film may be partially removed from the adhesive side to facilitate installation on both sharp-edged and flat surfaces. The sealing is completed by removing the remaining film and adhering the tape to the support.
If concealed taping is required, a version with a second adhesive strip on the carrier side is also available.
Further details regarding installation can be found in the specific instructions provided by the supplier.
PLASTER BAND LITE OUT
Supply and installation of tape suitable for plastering, with mounting adhesive strip, Type PLASTER BAND LITE OUT.
Composition
From top layer to bottom layer:
-
breathable three-layer PP membrane;
-
acrylic dispersion without solvents;
-
easy-release PP film.
Properties
-
Thickness [mm]: 0,5
-
Water vapour transmission (Sd)[m]: ≤ 1
-
Tensile strength [N/50 mm]: 290/190
-
Elongation at failure [%]: ≥ 40/≥ 70
-
Watertightness: comply with (EN 1928)
-
Resistant to UV rays: 3 months
-
Application temperature [C°]: +5/+35
-
Thermal resistance [C°]: -40/+80
-
Storage temperature [C°]: +5/+25
-
Solvents: no
Description
The application surface must be dry, free of dust and grease, and not be anti-adhesive. Surface elements must be removed so that the membrane is not damaged during application.
Technical fabric perfect for subsequent plastering, ensuring excellent visual appeal by allowing the tape to be concealed behind claddings and plaster.
Recommended use: The tape is designed exclusively for outdoor applications.
Suitable for application on various smooth building substrates, such as timber or OSB panels, without the need for additional surface treatment. If the tape is applied to brick or concrete surfaces, the use of a primer such as PRIMER SPRAY is recommended.
The complete list of approved application surfaces can be found in the specific instructions provided by the manufacturer.
Installation: If applicable, the protective release film may be partially removed from the adhesive side to facilitate installation on both sharp-edged and flat surfaces. The sealing is completed by removing the remaining film and adhering the tape to the support.
If concealed taping is required, a version with a second adhesive strip on the carrier side is also available.
Further details regarding installation can be found in the specific instructions provided by the supplier.
