WATERPROOFING PROFILE WITH HIGH MECHANICAL RESISTANCE
START BAND
START BAND is the highly mechanically resistant waterproofing profile for the long-term protection of walls and foundation walls against rising damp.
It is also ideal in extreme temperatures and for use as a general purpose wall barrier.
START BAND, THE WATERPROOFING SHEATH WITH SUPERIOR RESISTANCE
Due to its elasticity, the START BAND waterproofing profile is extremely easy to install even around corners and is resistant in case of perforations or mechanical fastening. It is compatible with bitumen, does not degrade and is resistant to low temperatures, UV rays and wear from walking.
The START BAND profile is also available in an adhesive version (STARTA120 and STARTA160), ideal when applied in combination with ALU START, for an infallible connection to the ground.
Documents
| Technical data sheets |
|---|
START BAND
| CODE | B
[mm]
|
s
[mm]
|
L
[m]
|
B
[in]
|
s
[mil]
|
L
[ft]
|
pcs. |
|---|---|---|---|---|---|---|---|
| START100 | 100 | 0.8 | 25 | 3.9 | 31 | 82 | 12 |
| STARTA120 | 120 | 0.6 | 20 | 4.7 | 24 | 66 | 12 |
| STARTA160 | 160 | 0.6 | 20 | 6.3 | 24 | 66 | 8 |
Technical Data
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Tensile strength | DIN 53504 | ≥ 6,5 MPa | - |
| Resistance to tearing | DIN 53504 | ≥ 25 kN/m | ≥ 143 lbf/in |
| Elongation | DIN 53504 | ≥ 300 % | - |
| Dimensional tolerance | DIN 7715-5 | classe P3 | - |
| Reaction to fire | EN 13501-1 | class E | - |
| Resistance to UV and resistance to ozone | DIN 7864-1 | conforming | - |
| Water vapour resistance factor (μ) | EN 1931 | ca. 32000 | - |
| Thermal resistance | - | -30 / 100 °C | -22 / 212 °F |
Specifications
Supply and installation of waterproofing profile with high mechanical resistance, type START BAND
Composition:
Support EPDM-based synthetic rubber
Properties:
- Temperature resistance [°C] : -30/+100
- Reaction to fire : classe E
- UV resistance : conforme
- Water vapour resistance factor μ : 32000
It can be applied on various smooth building substrates such as timber, OSB boards without additional surface treatment. The surfaces must be dry, free of dust and solvents such as grease or oil. We recommend the use of PRIMER for rough surfaces such as rough OSB boards. Once the tape has been applied, it is recommended to use the special roller RLL45 to obtain a perfect application.
Composition
| SUPPORT | EPDM-based synthetic rubber |
|---|
Related products
