SILENT WALL BYTUM
SOUNDPROOFING AND WATERPROOFING BITUMINOUS MEMBRANE
Installed inside the counter wall or false ceiling, the SILENT WALL BYTUM sheet ensures an excellent reduction in airborne noise transmission.
Made of elastoplastomeric bitumen, it has a high surface mass (6 kg/m²) and minimal thickness: these two features make it a perfect soundproofing waterproofing sheet.
APPLICATIONS
- Ideal in all situations where an increase in mass is required to increase soundproofing power and reduce airborne noise transmission
- Suitable for all situations where there is a need to achieve great performance in a small space
The soundproofing power of SILENT WALL BYTUM in different configurations and stratigraphies has been tested by the Free University of Bolzano according to EN ISO 10140-2.
Documents
-
Technical data sheets
-
Technical Manual
SILENT WALL BYTUM
| CODE | H
[m]
|
L
[m]
|
s
[mm]
|
A
[m²]
|
pcs./pallet |
|---|---|---|---|---|---|
| SILWALL | 1.2 | 5 | 4 | 6 | 30 |
Specifications
Supply and installation of soundproofing and waterproofing bituminous foil, type SILENT WALL MASS
Composition:
- Single-layer elastoplastomeric bitumen, covered on both sides with a polypropylene non-woven fabric. Does not contain harmful substances
Properties:
- Thickness [mm] : 4
- Soundproofing power estimate for a single profile [dB] : 24
- Air mass [kg/m²] : 6
Suitable for timber-to-timber installation to create a physical and mechanical separation between the two elements, thus avoiding the transmission of vibrations caused by impact sound. To increase the vibration absorption capacity, it is advisable to install the profile both below and above the timber floor. Install the profile on the upper section of the wall and fix it mechanically with staples every 40/60 cm. Then install the horizontal panel of the floor and repeat the operation.
